Click introduces new Aquip Recessed Mounting Kits
Click Scolmore introduces a new and innovative Recessed Mounting Kit for its Aquip66 2-gang weatherproof socket enclosures. It will slash socket protrusion by 50%, ensuring a sleek and discreet installation.
The kit is made up of three components – a polycarbonate mounting base, a black silicone rubber seal and a polycarbonate bezel.
Here are four easy steps for installing an Aquip66 2-gang weatherproof socket with the new recessed mounting plate:
• Step 1 - use the mounting base to mark against the wall and chase out approx. 173 x 145 x 42mm from the brick work.
• Step 2 - with the mains power OFF, pull through the mains cable. Then insert wall plugs, screw the mount and seal into position.
• Step 3 - ensure the mounting base is securely screwed to the wall with the silicone rubber seal. Now clip the outer bezel onto the fitting.
• Step 4 - finally, wire up, insert and secure the Aquip66 Weatherproof Socket into the Recessed Mounting Kit.
The kit is available in anthracite grey to match the IP66 Aquip Weatherproof range.